Welcome to World Of Sat

Blade BM500s Satellite Receiver
Specification

•250 MHz IBM PowerPC Processor (350 Mips)
•2 LED status
•Linux Operating System
•Full automatic service scan
•Supports bouquet-lists
•Supports multiple LNB-Switching control (supports DiSEqC)
•1 x Smartcard-Reader
•Unlimited channel lists for TV/Radio
•SPDI/F Interface for digital bit stream out (AC-3 / DTS)
•MPEG2 Hardware decoding
•Channel-change time < 1 second - Fully adaptable OSD in many languages (skin-support)
•100Mbit full duplex Ethernet Interface
•Supports EPG (electronic program guide)
•1 x Scart-interface (fully controlled by software)
Video decoder:

•Video Compression MPEG-2 and MPEG-1 compatible
•Video Standard PAL and NTSC
•Video Formats 4:3 / 16:9
•Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)
Letterbox precolating for 4:3 TV-Device Audio decoder:

•Audio Compression MPEG-1 & MPEG-2 Layer I and II
•Audio Mode Dual (main/sub), Stereo
•Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
Video parameter:

•Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
•Teletext filter conforms with ETS 300 472 Standard
TV-Scart:

•Output: FBAS,RGB,S-VHS over OSD selectable
DBS-Tuner:

•Frequency Range 950 .. 2150 MHz
•Signal Level - 65 dBm .. - 25 dBm
•Signal-to-Noise Level 12 dB max.
•DBS-Tuner Input Connector F-Type female
•Input Impedance 75 Ohm
•AFC +/- 3 MHz
•Demodulation Shaped QPSK
•Input Symbol rate 2 .. 45 Mbaud/s, SCPC / MCPC
•FEC Viterbi and Reed-Solomon
•Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
•Roll-off Factor 35 %
•Demultiplexing according ISO 13818-1
Ethernet:

•100 MBit compatible, bi-direktional interface
•Function Update of Firmware and Preprogramming
LNB Power and polarisation:

•LNB Current 500mA max. ; short-circuit-proof
•LNB Voltage vertical < 14V without load, > 11,5V at 400mA
•LNB Voltage horizontal < 20V without load, > 17,3V at 400mA
•LNB shut-off at Standby-Mode
Count of active satellite positions:

•DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
•DiSEqC - Rotor Control
Output digital:

•Output Level 0,5 Vss on 75 Ohm
•Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
•S/PDIF-Output optical (AC3)
Output analog:

•Output Level L/R 0,5 Vss on 600 Ohm
•THD > 60 dB (1 kHz)
•Crosstalk < -65 dB
Seriel Interface RS 232:

•Type RS232 bi-directional
•Bit rate 115,2 kBit/s max.
•Plug Connector SUB-D-9
•Function Update of Firmware and Preprogramming
Power consumption:

•< 10W / 12V
Input voltage:

•DC12V,alternating acurrent +/- 15%
External power supply:

Input:

•110-240V AC / 50-60Hz / 0,6A
•Output:
•12V = / 1A
Others:

•Ambient Temperature +15°C...+35°C
•Humidity < 80%
IT IS THE CUSTOMERS RESPONSIBILITY TO ENSURE THAT THIS BOX IS USED IN A LEGAL AND CORRECT MANNER. CONNECTING THIS BOX TO A LIVE NETWORK DOES CONTRAVENE THEIR TERMS AND CONDITIONS.