Eagle Linux Box-Satellite
Eagle Linux Box-Satellite
The new Eagle Linux box is the most powerfull satellite receiver in its range.
The Eagle Box is Linux satellite TV receiver, with 1 x Smartcard-Reader.
- 250 MHz IBM PowerPC Processor (350 Mips)
- 2 LED status
- Linux Operating System
- Full automatic service scan
- Supports directly bouquet-lists (indirect unlimited)
- Supports multiple LNB-Switching control (supports DiSEqC)
- 1 x Smartcard-Reader
- Unlimited channel lists for TV/Radio
- SPDI/F nterface for digital bit stream out (AC-3 / DTS)
- MPEG2 Hardware decoding
- Channel-change time < 1 second
- Fully adaptable OSD in many languages (skin-support)
- 100Mbit full duplex Ethernet Interface
- Supports EPG (electronic program guide)
- 1 x Scart-interfaces (fully controlled by software)
- Video decoder:
- Video Compression MPEG-2 and MPEG-1 compatible
- Video Standard PAL and NTSC
- Video Formats 4:3 / 16:9
- Footage 16:9, automatic assimilation for 16:9 TV-Device (over Scart)
- Letterbox precolating for 4:3 TV-Device Audio decoder:
- Audiokompression MPEG-1 & MPEG-2 Layer I and II
- Audio Mode Dual (main/sub), Stereo
- Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz
- Video parameter:
- Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
- Teletext filter in conformity with ETS 300 472 Standard
- TV-Scart:
- Output: FBAS,RGB,S-VHS over OSD selectable
- DBS-Tuner:
- Frequency Range 950 .. 2150 MHz
- Signal Level - 65 dBm .. - 25 dBm
- Signal-to-Noise Level 12 dB max.
- DBS-Tuner Input Connector F-Type female
- Input Impedance 75 Ohm
- AFC +/- 3 MHz
- Demodulation Shaped QPSK
- Input Symbol rate 2 .. 45 Mbaud/s, SCPC / MCPC
- FEC Viterbi and Reed-Solomon
- Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8, automatic assimilation
- Roll-off Factor 35 %
- Demultiplexing according ISO 13818-1
- Ethernet:
- 100 MBit compatible, bi-direktional interface
- Function Update of Firmware and Preprogramming
- LNB Power and polarisation:
- LNB Current 500mA max. ; short-circuit-proof
- LNB Voltage vertical < 14V without load, > 11,5V at 400mA
- LNB Voltage horizontal < 20V without load, > 17,3V at 400mA
- LNB shut-off at Standby-Mode
- Count of active satellite position:
- DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
- DiSEqC - Rotor Control
- Output digital:
- Output Level 0,5 Vss on 75 Ohm
- Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
- S/PDIF-Output optical (AC3)
- Output analog:
- Output Level L/R 0,5 Vss on 600 Ohm
- THD > 60 dB (1 kHz)
- Crosstalk < -65 dB
- Serielle Interface RS 232:
- Typ RS232 bidirectional
- Bit rate 115,2 kBit/s max.
- Plug Connector SUB-D-9
- Function Update of Firmware and Preprogramming
- Power consumption:
- < 10W / 12V
- Input voltage:
- DC12V,alternating acurrent +/- 15%
- Extern power supply:
- Input:
- 110-240V AC / 50-60Hz / 0,6A
- Output:
- 12V = / 1A
- Others:
- Ambient Temperature +15°C...+35°C
- Humidity < 80%